Windows XP Dialup Networking Setup

	Click the Start menu and open Control Panel.
	Choose Phone and Modem Options.
	Click the Modems tab. If your modem is installed and properly working, proceed to Dial-Up Connection. Otherwise, click Add.
	Click Next to continue with the Add Hardware Wizard.
	If Windows XP was successfully able to detect your modem, then you should see something highlighted similar to what is shown to the left. If not, you either do not have a modem or Windows XP does not recognize it. In the latter case, consult your modem manual or manufacturer to troubleshoot. Click OK.
	Click the Start Menu and open the Control Panel.
	Click Network and Internet Connections.
	Specify your Location Information as appropriate.
	Click OK.
	In the New Connection Wizard, select create a Dial-up connection. Click Next
	Fill in NAII for the company name. Click Next.
	Add the Appropriate Phone Number to Dial. Click Next.
	You have successfully created the Dial-up connection for NAII. Click Finish.
	Click the Start Menu, then go to Connect To, then click NAII.
	Type your User name and password. Be sure you are set to dial the correct number. Click Dial
	Your modem will dial.
	It should then verify your user name and password. You should now be connected to NAII.

---

All Contents Copyright © 1999-2001 NAII, LLC.
Acceptable Use Policy  |  Privacy Policy